Genset Cummins Diesel Genset Cummins KTA19-G6 575 Kva

Introduction - For Your Need To Know

The KTA19-Series benefits from years of technical development and improvement to bring customers an innovative and future proof diesel engine that keeps pace with ever changing generator set requirements.  Recognized globally for its performance under even the most severe climatic conditions, the KTA19-Series is widely acknowledged as the most robust and cost-effective diesel engine in its power range for the generator set market.

The Cummins KTA Series Are The Family Engine Very Well Known In The World and Till Now Still Produce. Cummins KTA Series Basically have A 3 Varian Engine  : KTA 19 ; 18.9 Liter\19.000 cc - Turbocharged aftercooled ; KTA 38 ; 37.8 Liter\38.000 cc - Turbocharged AfterCooled and KTA 50 ; 50.3 Liter\50.000 cc - Turbocharged Aftercooled. and Each Of Them have a Different Engine Output.

Feature

Aftercooler – Large capacity after cooler results in cooler, denser intake air for more efficient combustion and reduced internal stresses for longer life.  

Fuel System – Cummins exclusive lowpressure PT™ system with wear compensating pump and integral dual flyweight governor. Camshaft actuated fuel injectors give accurate metering and timing. Fuel lines are internal drilled passages in cylinder heads. Spin-on fuel filter.  

Cylinder Block – Alloy cast iron with removable wet liners. Cross bolt support to main bearing cap provides extra strength and stability.  

Service and Support - G-Drive products are backed by an uncompromising level of technical support and after sales service, delivered through a world class service network.

Turbocharger – Cummins Turbo Technologies (CTT) exhaust gas driven turbocharger mounted at top of engine provides more power, improved fuel economy, altitude compensation, and lower smoke and noise levels.  

Cooling System – Gear driven centrifugal water pump. Large volume water passages provide even flow of coolant around cylinder liners, valves, and injectors. Bypass thermostats regulate coolant temperature. Spin-on corrosion resistors check rust and corrosion, control acidity and remove Impurities.

These Diesel Engine Have a 610 Kwm@RPM 1500, and 664 Kwm@RPM 1800 Gross Engine Power Output At Peak Power ( 110%).

Genset Cummins KTA19-G6  575 Kva famous brand KTA19-G6 cummins generator set  :
- low fuel consumption 
- high temperature operation 
- the warranty time is 1 year

Specifications of KTA19-G6 cummins generator set is following:
•    Alternator: Stamford, Leroy Somer, Marathon
•    Water-cooled
•    8hrs operation base tank
•    Key start / auto start
•    Sound-proof / weather-proof canopy is optional
•    230 / 400V AC, 50Hz / 60Hz, 0.8pF three-phase and four wires alternating current output
•    Frequency: <3%
•    Frequency at stable state: <0.5%
•    Frequency deviation at instantaneous state: ≤ 10%
•    Frequency return time: ≤3s
•    Voltage deviation at stable state: ≤±1%
•    Voltage deviation at instantaneous state: ≤ 20%
•    Voltage return time: ≤4s
•    Voltage modulation: ≤0.3%
•    Genset Cummins KTA19-G6  575 Kva Standard configuration of gensets

a) Engine type: water-cooled, in line four-stoke, Humit cylinder liner, direct injection
b) Alternator: Marathon brushless alternator
•    18) Control system:
c) Automatic alarm system: the unit has the acousto-optics alarm system and arrestor for any situation as the start defeat, the water is over temperature, the oil pulls down, over speed, over load and over current
d) Operation display:
i) Unit voltage, tri-phase load current and frequency display
ii) Water temperature, oil pressure display
iii) Fuel level, fuel temperature display
iv) Audible and visual alarm lamps and buzzers
•    19) Starting system: DC alternator is used to start engine
•    20) Short circuit protection: MCCB air switch
•    21) Cooling system: combined cooling water tank fitted to meet the requirement of radiation at ambient temperature 40°C
•    22) Filter system: oil, fuel and air filter
•    23) Accessories: exhaust elbow, bellow, muffler
•    24) Supply standard collocation:
a) Diesel engine with all accessories, 3 filter, electric systems
b) Alternator
c) Steel structure
d) Fan and water tank cooling system
e) Flange connector
f) 12 / 24V starting motor and charge engine
g) Air cleaner, fuel cleaner, oil cleaner
h) On-board control panel
i) MCCB air conservation switch
j) 12 / 24V starting accumulator and Battery line
k) Set shock absorber
l) High-efficient silencer